Fike - Breakglass Manual Call Point Conventional [FST.2.15.01-1]

TWINFLEX® MANUAL CALL POINT

DESCRIPTION

The Twinflex Manual Call Point (MCP) is a ‘resettable’ style MCP that has the option of being flush fitted if required. Once operated the device latches into the alarm position and requires manually resetting via a special key. The device has been designed to fit a standard UK single gang deep (47mm min) back box and each MCP comes supplied with a flush fitting adaptor. The device is fitted with a single colour red LED to indicate activation and End Of Line status.

This MCP is compatible with Fike’s Twinflex range of control panels and may be installed on the same zone as the Multipoint detector/sounder and associated Twinflex devices. Its operating parameters are configured using a DIL switch on the rear of the device.

SPECIFICATIONS

Dimensions: Width x Height: 88mm x 88mm
Depth: Standard inc base 52mm
Depth: Flush mounted 25mm
Operating Temperature: -10°C to +50°C
Voltage Range: 20 to 35V DC
LED Indication: Activated: 0.5 Second Interval
End Of Line: 5 Second Interval
System Compatibility: Twinflex: V1 onwards
TwinflexPro: V1 onwards
Zone Current @ 24VDC: Quiescent: 50uA
Active: 16mA
SLU Rating: 3
DLU Rating: 16

APPROVALS

Approved to EN54 Part 11

ORDERING INFORMATION

Fike P/N: 402 0006 Twinflex Manual Call Point - RED